Optimisation of hybrid tandem metal active gas welding using Gaussian process regression

In this paper, an additional filler wire with opposite polarity was inserted in tandem flux cored arc welding process to increase the welding speed and deposition rate. In this hybrid welding, the optimisation of welding parameters is required to improve the bead geometry which directly indicates the welding quality. However, the correlation between the parameters and the bead geometry is hard to identify, so the process parameters are usually selected intuitively by the experienced engineers. Therefore, welding process modelling is constructed with the Gaussian process regression model, and parameter optimisation is performed with sequential quadratic programming optimisation algorithm. The proposed modelling optimisation process is verified by performing the welding experiment using the parameters that are optimised by the proposed process.     

电子束焊-钎焊复合焊T形接头组织性能分析

实现了TA15钛合金T形接头的电子束焊-钎焊复合焊接.采用扫描电镜、能谱分析仪和X射线衍射分析仪等测试手段,对接头的微观组织形貌、元素成分分布和界面反应产物等进行分析研究.并分别对复合焊接头和电子束焊接头的弯曲性能进行了比较分析.结果表明,在适当的工艺条件下,可以实现TA15钛合金T形接头的电子束-钎焊复合焊接.在电子束焊缝和钎焊缝的界面处存在Cu,Ni元素的扩散和界面反应.复合焊接头的塑性要优于电子束焊,其所承受的最大压强略低于电子束焊.     

WELL-DISPERSED NANODIAMOND AQUEOUS SUSPENSIONS——PREPARATION,PROPERTIES AND APPLICATIONS

1　INTRODUCTIONAsitwassynthesizedundertheconditionofhightemperatureandhighpressure ,andowingtothecommoncharacteristicsoffinedimensionandhighsurfaceenergyofnanoscaledparticles ,nanodiamond (ND )preparedbydetonationexplosioncaneasilyformstrongaggregates WhenNDpowderwasaddedinaqueousmedia ,obviousaggregationandsedimentationcanbeobserved ,whichimpairsitscharacteristicsasananometerparticle ,andthushindereditsapplication Inthiscase ,stabledispersionofNDinaqueousmediaisofgreatimportance[1 4 ] …     

High-power hybrid plasma spraying of large yttria-stabilized zirconia powder

To testify to the advantage of large ceramic powder spraying, numerical simulations and experimental studies on the behavior of large yttria-stabilized zirconia (YSZ) powder in a high-power hybrid plasma spraying process have been carried out. Numeric predictions and experimental results showed that, with the high radio frequency (RF) input power of 100 kW, the most refractory YSZ powder with particle sizes as large as 88 μm could be fully melted and well-flattened splats could be formed. A large degree of flattening (ξ) of 4.7 has been achieved. The improved adhesive strength between the large splat and the substrate was confirmed based on the measurement of the crack density inside of the splats. A thick YSZ coating >300 μm was successfully deposited on a large CoNiCrAlY-coated Inconel substrate (50×50×4 mm in size). The ultradense microstructure without clear boundaries between the splats and the clean and crack-free interface between the top-coat and the bond-coat also indicate the good adhesion. These results showed that highpower hybrid plasma spraying of large ceramic powder is a very promising process for deposition of highquality coatings, especially in the application of thermal barrier coatings (TBCs).     

可编程控制器的数据通讯及网络技术

本文给出用A系列可编程控制器中AJ71C24与计算机通讯实例，并介绍了MELSES NET可编程控制器的数据通讯网络的特点。     

溶胶-凝胶法制备γ -缩水甘油醚丙基三甲氧基硅烷/正硅酸乙酯杂化材料研究

采用溶胶-凝胶工艺制备γ-缩水甘油醚丙基三甲氧基硅烷/正硅酸乙酯(GPTMS/TEOS)杂化材料，用热失重(TGA)和动电位扫描(PDS)法研究了该材料的结构、耐热及防腐保护性能.结果表明：当GPTMS/TEOS=1/3(摩尔比)时，随H2O/Si摩尔比的增加,该材料的耐热性及防腐保护性能提高；用X射线衍射分析表明:该材料结构为非晶态结构.     

铝合金激光-小功率脉冲MIG电弧复合热源焊接特性分析

针对5A06铝合金,通过一系列对比数据综合分析了MIG焊和激光MIG复合热源焊接技术在焊缝熔深、焊缝成形、焊接速度、焊接热输入等方面的优缺点.结果表明,在MIG平均电流小于200 A的小功率脉冲MIG电弧区域内,等热输入且等焊接速度条件下,激光-MIG复合热源焊接技术与MIG相比可以提高焊缝深宽比1～2倍,增加焊缝熔深0.43～2.5倍;等热输入且等平均焊接电流条件下,与MIG相比,激光MIG复合热源焊接技术可以提高焊接速度0.6～1.5倍,增加焊缝熔深0.5～5.9倍;激光MIG复合热源焊接技术可以用高于MIG焊0.6～6.5倍的焊接速度和更小的焊接热输入获得与MIG同样的焊缝熔深;与MIG焊相比,激光MIG复合热源焊缝的铺展性更好,更适合于高速焊接;MIG复合2 kW的激光能量后会增加平均电弧电压、减小平均电流.     

基于工业局域网的微机与PLC数据通信实现方法

以美国A－B公司PLC2系列为例，介绍了一种借助VisualBasic通信控件编制微机与工业。PLC之间数据通信软件的方法。对于不同系列的PLC均能用此法简易地开发出实现微机与PLC通信的软件。     

远程数控故障诊断系统中语音通信的实现

文章介绍了一种基于Internet利用WIN API（应用程序编程接口）实现数控机床远程故障诊断系统中语音通信的解决方法,并利用C＋＋Builder软件实现了该语音通信部分,取得了较为理想的效果.     

ZL114铝合金激光--龟弧的复合焊接

设计了一种激光-电弧复合热源焊接ZL114合金的新工艺，并对焊后的试件进行了X光检测、抗拉强度和全相组织等实验。结果表明，该种新工艺对铝合全有良好的适应性和可行性，是焊接领域的一个趋势。